top of page

Load data for .219 Donaldson Wasp + .224 | 40gr | Sierra Blitzking

Recommended Powder(s): none

.219 Donaldson Wasp + .224 | 40gr | Sierra Blitzking

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 40gr | Sierra Blitzking
Manufacturer SKU:
1440
Bullet Weight:
40gr | 2.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.670" | 17.0mm
Caliber:
.219 Donaldson Wasp load data
Case Length (l3):
1.810" | 46.0mm
Cartridge Length (C.O.L.):
2.177" | 55.3mm
Seated Depth:
0.303" | 7.7mm
Shank Seated Depth:
0.303" | 7.7mm
Case Capacity:
35.1 Grains of Water | 2.28 cm³
Primer Size:
Large Rifle (LR)
Max. allowed Pressure:
40988 psi | 2826 bar
LID:
LID_B5726_C105
Last updated:
2025-02-02

Load data for 28 loads in caliber .219 Donaldson Wasp with .224 | 40gr | Sierra Blitzking bullet and 14 powders such as none. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
Accurate 2015
<<locked>>
91%
36260
88%
**17
95%
[Accurate 2495]*
<<locked>>
96%
34548
84%
**46
94%
Alliant AR-Comp
<<locked>>
95%
36854
90%
**06
98%
Alliant Reloder-10x
<<locked>>
87%
36027
88%
**46
96%
[Baschieri & Pellagri 106]*
<<locked>>
84%
36056
88%
**96
93%
[Hodgdon H322]*
<<locked>>
91%
36680
89%
**43
92%
Hodgdon TrailBoss
<<locked>>
96%
29167
71%
**26
100%
IMR 4198
<<locked>>
86%
36318
89%
**01
97%
Norma 200
<<locked>>
83%
35752
87%
**10
97%
ReloadSwiss RS 14
<<locked>>
96%
28689
70%
**72
100%
[Somchem S335]*
<<locked>>
94%
36753
90%
**58
92%
Vihtavuori N120
<<locked>>
85%
36796
90%
**14
100%
Vihtavuori N130
<<locked>>
89%
35563
87%
**55
95%
[Vihtavuori N133]*
<<locked>>
96%
36463
89%
**68
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
[Accurate 2015]*
<<locked>>
82%
26963
66%
**22
90%
[Accurate 2495]*
<<locked>>
90%
27209
66%
**20
90%
[Alliant AR-Comp]*
<<locked>>
83%
25135
61%
**99
91%
[Alliant Reloder-10x]*
<<locked>>
81%
28935
71%
**20
92%
[Baschieri & Pellagri 106]*
<<locked>>
81%
32532
79%
**94
91%
[Hodgdon H322]*
<<locked>>
88%
33040
81%
**25
90%
Hodgdon TrailBoss
<<locked>>
81%
22727
55%
**39
100%
IMR 4198
<<locked>>
81%
31372
77%
**59
95%
Norma 200
<<locked>>
81%
33475
82%
**55
96%
ReloadSwiss RS 14
<<locked>>
81%
22481
55%
**85
100%
[Somchem S335]*
<<locked>>
90%
32111
78%
**27
90%
Vihtavuori N120
<<locked>>
81%
33098
81%
**15
99%
[Vihtavuori N130]*
<<locked>>
81%
27804
68%
**15
92%
[Vihtavuori N133]*
<<locked>>
88%
28543
70%
**28
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page